Window Shield™

SPECIFICATIONS

Thickness 1.5 mil nominal (short term), 3.1 mil nominal (long term)

Film Polyethylene w/UV Inhibitor (short term), PVC w/UV Inhibitor (long term)

Adhesive Type Water-based Acrylic

Adhesion Level 8.5 oz/in (short term), 48 oz/in (long term)

Tensile Strength 2-3000 psi (short term), 5100 psi (long term)

Temperature (Ideal) 70° F

Humidity (Ideal) 50%

Elongation 300-400% (short term), 260% (long term)

Chemical Name Acrylic PSA Tapes

Chemical Family Acrylic PSA Polyethylene Film

Chemical Formula Proprietary

Trade Name Window Shield

Material Use Surface Protection

DOWNLOADS

Window Shield Sell Sheet

Window Shield Spec Sheet

Window Shield SDS Sheet

Surface Shields Catalog

FAQS

INSTRUCTIONS
Peel back edge of Window Shield and begin to unroll. Press down edge at beginning of area to be covered so Window Shield adheres. Continue rolling onto area, applying pressure and smoothing down the film while doing so. Carefully cut end with a sharp edge. When finished, fold edge of the film back against the roll to use at a later time. Removal: roll up Window Shield and discard.

HANDLING AND STORAGE
Store at room temperature and keep out of direct sunlight exposure. If Window Shield is stored in extreme conditions over 95° F or below 40° F allow product to return to room temperature prior to use.

SAFETY
SDS sheets for Surface Shields products available by request.